Aeris XR1 NX Air Dive Computer

Editor’s Rating
Rating

Check Current Prices

Amazon: Aeris XR1 NX Air Dive Computer

Summary

Pros: Simple, clean display. Easy to operate. Nitrox capable. Reset Feature.
Cons: No audible alarms. No backlighting.
Recommended Uses: The Aeris XR1 dive computer is a fantastic entry level dive computer – there aren’t heaps of parameters to set, so operation is simple. Be aware that the XR1 doesn’t have audible alarms or backlighting, though, so you really have to consider the type of diving you’ll be doing and determine whether you’ll need these features.

Full Review

The beauty of the Aeris XR1 dive computer is in its simplicity. It possesses both AIR and NITROX dive modes, and has all the features you need to dive both modes successfully and safely. It can operate to a maximum depth of 100 metres.

Uesability and Features

The Aeris XR1’s split screen, icons and graphics, and oversized digits make reading the display very easy. You can customize the information displayed by pressing the single operation button, so that if your dive is not too technical, you can simply see your current depth and how long you can safely stay there. If you need more information, there are three other screens accessible with the same button.

A decompression dive has three screens displaying the relevant information, all of which are accessed using the same easy logic. Once manually activated, the Aeris XR1 will run a diagnostic check so that you can see battery status and that all other features are operating correctly.

Aeris XR1 Review

Dive parameters can be set in sequence or you can bypass settings to access just the one you want. This is a great feature, as you’ll find many dive computers force you to sequence through the entire menu again if you happen to miss the one you want.

There are 4 surface sequences on the Aeris XR1 dive computer – SURFACE MODE, FLY MODE, DESAT MODE and PLAN MODE. SURFACE MODE immediately follows DIAGNOSTIC MODE once the XR1 has been activated, and this allows you to change general settings such as time, time format (12 or 24 hr) and units of measure. The PRE DIVE PLANNING SEQUENCE automatically starts after SURFACE MODE, prior to the first dive of this activation period, and the computer will scroll through a sequence of theoretical dive times for different depths which range from 9m – 57m. For repetitive dives it predicts dive times based on residual nitrogen or oxygen accumulation from your last dive and surface interval.

The Aeris XR1 dive computer has a Nitrogen bar graph which monitors 12 different tissue compartments simultaneously and is divided into 3 zones to indicate if you are in a No Decompression, Caution or a Decompression (danger) zone. The Oxygen Accumulation bar graph represents oxygen loading either per dive or accumulated oxygen over a 24 hr period.

Other features of the Aeris XR1 dive computer includes on-board logging of up to 12 dives and a reset button which is handy if you want to lend the Aeris XR1 to another diver. The lithium battery provides around 300 hours of continuous operation and is user changeable with a Hot Swap capability.

Amazon: Aeris XR1 NX Air Dive Computer

Aeris XR1 NX Air Dive Computer4Admin2015-06-12 04:34:24The beauty of the Aeris Xr 1 Nx is in its simplicity. It possesses both AIR and NITROX dive modes, and has all the features you need to dive both modes successfully and in safety. It can operate to a maximum depth of 100 metres. Check Amazon Price…

One thought on “Aeris XR1 NX Air Dive Computer

  1. I bought this computer for my wife and tested it out one time so far. It did everything I wanted it to do. The assent alarm was a little more sensitive than my other computer, but all in all I’m happy with it. It also dose nytrox and would make a great back up computer tor someone more advanced. I did not use the compass but the numbers are easy to use and the besle turns easy.

Leave a comment

Your email address will not be published. Required fields are marked *

*

Rating